1-844-225-3917
Push pier systems utilize high-strength round steel tubes and load transfer brackets to stabilize and/or lift sinking or settling foundations. They can also provide additional capacity to existing foundation systems.
Push piers are installed by securing the foundation bracket against and below the existing footing, directly beneath the footing and foundation wall, to the side of the footing or foundation wall, or below existing slabs. Pier sections are then driven hydraulically through the bracket and into the soil using the combined structural weight and any contributory soil load as drive resistance. Pier sections are added and driven until a suitable load-bearing layer is encountered. At that point, the structure either begins to lift or the target pressure/load is achieved.
Push piers can also be employed to raise settled concrete slabs. Slab piers function similarly to other push pier systems but feature brackets that are specifically designed to raise settled concrete floors.
Push pier systems are sometimes referred to as jacked piles, resistance piers, or hydraulically driven piers.
Push piers are installed by hydraulically "pushing" hollow steel tubes into the soil through heavy-duty brackets. The system is composed of bracket assemblies, an external sleeve, a starter tube, and a pier tube.
Push pier systems are often referred to as push piers, jacked piles, resistance piers, or hydraulically driven piers. The type of system used will depend on the specific application and installation location.
For additional information regarding push foundation systems, including technical product specifications, refer to the Push Foundation Systems section in our Technical Manual.