Case Studies

CSL Plasma planned renovations to a vacant end unit of a strip mall. The rear left corner of the unit had...

The 11-story Fleming Building in downtown Des Moines was built in 1909. The low rise building was constructed as a...

The proposed site for the new Knoxville Zoo Lion and Baboon Exhibit was within a previously developed area of the...

A slab-on-grade building addition was planned along the south and east sides of an existing school gymnasium. The gymnasium had experienced...

In 2010, Keller, Inc. began construction of a free stall milking complex designed to handle up to 380 head of...

A 4,000 square-foot family cottage was planned for a lakefront property. A geotechnical investigation identified a general soil profile consisting of...

A beach (at grade) boardwalk was proposed at Gray’s Lake Park within the area between the Raccoon River and Gray’s...

An equipment addition was planned within a three-story, steel foundry building. The equipment would be supported on four columns with an...

A new boat dock was planned along the shoreline of a small manmade lake that formed within the limits of...

Construction details for the new Culver’s restaurant included an 8-inch-thick poured concrete foundation wall, steel framing and anchored masonry veneer....

The condominium complex had a large trash compactor enclosed by three concrete block retaining walls and an access gate. The enclosure...

Des Peres Hospital is a 143-bed medical facility in St. Louis County, Missouri. A 13-foot tall, 12-inch thick poured concrete...